Check in the following lists if your device is supported by Cubicasa.
iOS devices
Not sure which one you have? Find the model number of your device, then identify your iPhone model or identify your iPad model. A newer device will improve scanning.
We require at least iOS 18.0 to be able to run on your Apple devices.
Device | Model |
iPhone | iPhone XR and newer devices. |
iPad | iPad Pro 11" (gen 1), iPad mini (gen 5), iPad Air (gen 3), and newer devices. |
What to do if your iPhone or iPad is no longer supported
Our app relies on the iOS system, so we have to make decisions about supporting older devices as Apple releases updates. If your device is no longer supported, you have a few options:
A second-hand iPhone: This can be a more budget-friendly way to get a compatible device.
An iPad: It can be a good alternative, especially if you use our app in specific locations.
Switching to Android: We also have an Android version, and there are many different phones available at various price points. See the Android requirements below.
LiDAR devices
Devices with LiDAR have better accuracy overall. They are usually the Pro version of iOS model.
iPhone 16 Pro Max
iPhone 16 Pro
iPhone 15 Pro Max
iPhone 15 Pro
iPhone 14 Pro Max
iPhone 14 Pro
iPhone 13 Pro Max
iPhone 13 Pro
iPhone 12 Pro Max
iPhone 12 Pro
iPad Pro 2022
iPad Pro 2020 (iPad Pro 12.9 inch 4th gen, iPad Pro 11 inch 2nd gen)
iPad Pro 2021
ToF devices
These Android devices have Time-of-Flight (ToF) sensors:
Samsung Galaxy S10 5G
Samsung Galaxy S20+ 5G
Samsung Galaxy S20 Ultra 5G
Android devices
We require at least Android 12 and ARCore support to be able to run on your Android device.
If you have a doubt or encounter issues, verify your device appears in the ARCore supported devices list. Should it be the case, please contact help@cubicasa.com or start a chat and provide us with the full model of your device and we'll take it from there.
If you device is not in the list of supported it simply can't run Cubicasa.
Mobile Data
Mobile data (i.e. a 4G/LTE or cellular-enabled iPad) is not required to send scans. You can use Wi-Fi from your home or office to send to the cloud for processing. The app requires internet access during initial startup but you can scan while offline.
Sending scans can use a lot of bandwidth. If you decide to use mobile data to send for processing, keep in mind that your mobile data charges can be large and may take longer.
Battery Consumption
Scanning uses a lot of processing power, however, you should not need more than 5% battery life to complete a scan, even a large one. We recommend, however, that you have at least 50% battery life.